找回密碼
 新用戶註冊
搜索
熱搜: hifi av 音樂
樓主: obee

[CAS] 又平又正的 CAS (MPD on Linux) - 2013-05-02

[複製鏈接]
 樓主| 發表於 2013-3-5 11:57:29 | 顯示全部樓層
本帖最後由 obee 於 2013-3-5 14:09 編輯

有關 Pogoplug 用 SSH connect,
多謝 baki1105 師兄告知, 原來我忘記左要教大家先開著 SSH, 大家可以睇番下面個 Youtube video 有教點開個 SSH:

回復

使用道具 舉報

 樓主| 發表於 2013-3-5 16:40:44 | 顯示全部樓層
本帖最後由 obee 於 2013-3-5 16:41 編輯

Mytek 在 Cubox 上的支援
有師兄問 Mytek DSD-192 有沒有 Linux driver, 原來是有的, 但給 ARM CPU 的只有源始碼 (Source Code). 於是我試下在我的 Cubox 上編譯 (compile), 但失敗了. 因為我沒有要 compile 所需的一些程式碼 (更準確應該叫 kernel-header), 加上我又無乜時間去深入研究...  

但就係我將呢件事放埋一邊之前, 我問了一下日本人阿 yo, 可否在下一個 Cubox audio tuned image release 之中加入相關的 kernel-header, 佢十分熱心咁, 唔單止答應我, 仲即時係佢個 Cubox 上試下 compile 個 Mytek USB driver. 佢經過多次失敗再嘗試, 終於成功 build 到個 Mytek DSD192 for Cubox 的 driver (module) 了

有 Mytek 和 Cubox 的師兄, 可以 download 番佢最新的 image (2013-03-03 版 - cubox-audio130303.img), 然後根據佢個 setup guide (阿 yo 兄佢知我唔係日本人, 唔識睇日文, 所以好好心咁用英文寫左個簡單 setup guide):

http://www.symphonic-net.com/kub ... t=topic&no=2394

希望有 Mytek 和 Cubox 的師兄可以試下, 無論成功與否都 update 番呢個 post (最好當然同日本人阿yo 講聲), 唔該晒!

評分

1

查看全部評分

回復

使用道具 舉報

 樓主| 發表於 2013-3-5 16:48:28 | 顯示全部樓層
adktk 發表於 2013-3-1 15:27
obee 兄,唔知道兩部機仔,又或者個 MDP 可否 support 到我部 Audinst DAC 呢?

你所指的 DAC 是不是這個?
http://www.headfonia.com/audinst-hud-mx1-dac/

據上文講, 它用 Tenor TE7022L 的 USB receiver chip:
http://www.gfec.com.tw/te7022l

係 support USB Audio Class 1, 16/24 bit Resolutions,  8/16/32/44.1/48/96 KHz sampling rates supported.
回復

使用道具 舉報

發表於 2013-3-5 22:00:10 | 顯示全部樓層
obee 兄, 小弟去左新高登一樓買左個 Pogoplug 回家,依家唔知點入手好。

小弟而家手上材料有: Progoplug, Audinst Hub-mx1 DAC, 煩請提示。
回復

使用道具 舉報

 樓主| 發表於 2013-3-5 23:03:55 | 顯示全部樓層
adktk 發表於 2013-3-5 22:00
obee 兄, 小弟去左新高登一樓買左個 Pogoplug 回家,依家唔知點入手好。

小弟而家手上材料有: Progoplug,  ...

只係照住做, 試下啦.
回復

使用道具 舉報

發表於 2013-3-5 23:37:47 | 顯示全部樓層
adktk 發表於 2013-3-5 22:00
obee 兄, 小弟去左新高登一樓買左個 Pogoplug 回家,依家唔知點入手好。

小弟而家手上材料有: Progoplug,  ...

去左佢個PAGE申請a/c先
我而家係3.2後半part打d command冇反應
回復

使用道具 舉報

發表於 2013-3-6 02:08:52 | 顯示全部樓層
obee 師兄, 如用TEAC UD-501是否沒有DRIVER玩唔到呢 ?
回復

使用道具 舉報

 樓主| 發表於 2013-3-6 07:48:39 | 顯示全部樓層
la3090 發表於 2013-3-6 02:08
obee 師兄, 如用TEAC UD-501是否沒有DRIVER玩唔到呢 ?

過個解碼在Linux 不用driver
回復

使用道具 舉報

 樓主| 發表於 2013-3-6 10:16:58 | 顯示全部樓層
本帖最後由 obee 於 2013-3-6 10:19 編輯
baki1105 發表於 2013-3-5 23:37
去左佢個PAGE申請a/c先
我而家係3.2後半part打d command冇反應


師兄如果 ssh 左入去, setup 中途碰到問題, 可以 capture screen 然後 post 出來.
capture 的 screen 只要有 putty / terminal 的畫面便可. 當中包括你打過的 command, 和系統回你的 error message. 咁會比較容易令大家知道問題所在

Capture Window 方法如下 (先教 Windows 下的方法再教 Mac OSX 下的方法):

回復

使用道具 舉報

發表於 2013-3-6 12:48:16 | 顯示全部樓層
obee 發表於 2013-3-6 07:48
過個解碼在Linux 不用driver

噢...謝謝...
今晚試下先
回復

使用道具 舉報

發表於 2013-3-6 16:59:02 | 顯示全部樓層
obee 發表於 2013-3-5 11:57
有關 Pogoplug 用 SSH connect,
多謝 baki1105 師兄告知, 原來我忘記左要教大家先開著 SSH, 大家可以睇番下 ...

obee 兄

感激不盡

評分

1

查看全部評分

回復

使用道具 舉報

發表於 2013-3-6 21:29:24 | 顯示全部樓層
麻煩哂obee ching,唔明點解話我cmd唔岩

3.jpg

2.jpg

1.jpg

回復

使用道具 舉報

 樓主| 發表於 2013-3-6 22:40:51 | 顯示全部樓層
baki1105 發表於 2013-3-6 21:29
麻煩哂obee ching,唔明點解話我cmd唔岩

What password you use to login pogoplug? If you use "ceadmin", then you are booting from the original ROM, not from USB. You should login using password "nosoup4u" instead.
回復

使用道具 舉報

發表於 2013-3-6 22:58:06 | 顯示全部樓層
obee 發表於 2013-3-6 22:40
What password you use to login pogoplug? If you use "ceadmin", then you are booting from the origi ...

我個PW係用我響pogoplug自己a/c個pw
第一個step都係用自己個pw先入到
用你個2個會Access denied
我唸我整錯左野了X_X

但係我用自己個PW做第一PART又做到,奇怪
回復

使用道具 舉報

 樓主| 發表於 2013-3-6 23:02:21 | 顯示全部樓層
baki1105 發表於 2013-3-6 22:58
我個PW係用我響pogoplug自己a/c個pw
第一個step都係用自己個pw先入到
用你個2個會Access denied

If you use "nosoup4u", it means that you are login the USB (the Linux that we are going to use).
Otherwise, you are using the built-in Linux image, in that case, just redo the steps and reboot with USB.
Please make sure the USB has Linux image written, although you can't test it has correct image written on or not.
回復

使用道具 舉報

發表於 2013-3-6 23:27:02 | 顯示全部樓層
obee 發表於 2013-3-6 23:02
If you use "nosoup4u", it means that you are login the USB (the Linux that we are going to use).
O ...

我係張個linux image就咁放入支usb手指對嗎?仲有adata係咪唔work呢? thx

4.jpg
回復

使用道具 舉報

 樓主| 發表於 2013-3-6 23:32:47 | 顯示全部樓層
baki1105 發表於 2013-3-6 23:27
我係張個linux image就咁放入支usb手指對嗎?仲有adata係咪唔work呢? thx

...

No, you need to write the image to USB thumb drive:

-------------------------------------------------------------------------------
2. 如果你打算用 Windows 將 image 寫入 micro SD 卡, 請再去:
http://www.alexpage.de/usb-image-tool/download/
download USB image writer

3. 寫入一張 4G或以上的 micro SD 卡, 如果係 Windows 上寫入 USB 手指, 個program 記住 "Run as Administrator":
-------------------------------------------------------------------------------
回復

使用道具 舉報

發表於 2013-3-7 01:03:40 | 顯示全部樓層
obee 發表於 2013-3-6 23:32
No, you need to write the image to USB thumb drive:

--------------------------------------------- ...

我都係WRITE左幾次都唔得....
支USB BOOT唔到
回復

使用道具 舉報

 樓主| 發表於 2013-3-7 08:07:26 | 顯示全部樓層
la3090 發表於 2013-3-7 01:03
我都係WRITE左幾次都唔得....
支USB BOOT唔到

我用 sandisk 4G 的.
回復

使用道具 舉報

發表於 2013-3-7 09:29:41 | 顯示全部樓層
我都係塞左係呢個STEP,用個Alex image tool restore左個image入去支usb手指都係認唔到.
今晚去買張咭再試下先
回復

使用道具 舉報

您需要登錄後才可以回帖 登錄 | 新用戶註冊

本版積分規則

Archiver|小黑屋|聯絡我們|刊登廣告|Hiendy.com 影音俱樂部 一個屬於音響愛好者的家

GMT+8, 2024-3-29 16:50 , Processed in 0.062558 second(s), 19 queries .

Powered by Discuz! X3.5

© 2001-2023 Discuz! Team.

快速回復 返回頂部 返回列表