一次完美的“downgrade”- Linger Audio - Apodidae ocxo switch

clplarry

CKL 發表於 2018-7-3 19:55
Yes, ordered from RS HK. Faster CPU, with WiFi and Bluetooth. If you use WiFi to avoid Ethernet, t ...

Yes, I only use WiFi to control the app of the android phone for selecting songs from the music folders of the USB hard disk which is directly connected to the USB port of my Raspberry Pi 3B.

clplarry

CKL 發表於 2018-7-3 13:36
With RPi 3B+, I switch to WiFi avoiding EMI from Ethernet.

The metal box you showed for housing your Raspberry Pi 3B+ is just the same as mine for housing my Raspberry Pi 3B. But I've just collected the new Pi 3B+ today to replace the old Pi 3B and found the metal box couldn't fit for housing the Pi 3B+ completely with the two halves embedded together by locking with the 4 screws fully on the bottom side to the upper side. In other words, the screws couldn't be fully driven into the holes from the bottom to the top as something on the Pi 3B+ board blocked the box from fully joining together. There is about 0.5mm distance between the two halves of the metal box which I didn't encounter with the old Pi 3B board before. Could your Pi 3B+ be fully embedded into the metal box with the screws fully driven into the holes from the bottom to the top? Please advise. Thanks         

CKL

clplarry 發表於 2018-7-6 23:29
The metal box you showed for housing your Raspberry Pi 3B+ is just the same as mine for housing my ...

I have no problem as my chassis is the new model catering for B or B+

clplarry

CKL 發表於 2018-7-7 08:51
I have no problem as my chassis is the new model catering for B or B+

Is your metal box for your Raspberry Pi 3B+ as the picture attached?
https://item.taobao.com/item.htm ... c-ad81-43af69f923fe

clplarry

It is because the CPU of the Raspberry Pi 3B+ thicker than that of the Pi 3B by 0.5mm. After smoothening the pressing pole of the metal cover by 0.5mm short, the problem was solved.

張東尼@FB

clplarry 發表於 2018-7-7 12:13
It is because the CPU of the Raspberry Pi 3B+ thicker than that of the Pi 3B by 0.5mm. After smoothe ...

The other smaller chip also moved on the B+

CKL

clplarry 發表於 2018-7-7 10:59
Is your metal box for your Raspberry Pi 3B+ as the picture attached?
https://item.taobao.com/item ...

This one:

isotopes33

獲益良多 ^_^ 咁如果將motherboard上既晶震全部換晒靚野唔知有冇幫助呢?