Make sure you use CORRECT driver type and size for TORX screw as picture attached. The one you will use is far left in the picture. However must turn very slowly with fingers.
WRONG type of driver or size will cause stripped head of the screw. 甘就事大了！
mlfan2012 發表於 2013-10-14 14:20
Make sure you use CORRECT driver type and size for TORX screw as picture attached. The one you wil ...
Thanks. The left one was exactly what I used but all 4 screws were just too tight to move.
I bought several screws with different size of handles but failed. I stopped trying because I don't want to damage them :<
The last option is to take it back to service centre.
hiendy_2011 發表於 2013-10-14 20:06
Thanks. The left one was exactly what I used but all 4 screws were just too tight to move.
I boug ...
I know it's frustrated, it took me some efforts before I can loose them one by one without scratching around. You sure can take the unit to nearby shop to do the job or I can be of help. I have other friends who have same system but just could not loose the screws easily even with right tool. You are not alone though.
樓主: micma
IP卡
狗仔卡
發表於 2013-10-2 16:16:19
顯身卡
。 當然，若不喜歡的也可把它關上
，而其設計亦不會妨外自行更換其他品牌的同型號膽管，在更換之後仍舊是可以把附助 LED 燈繼續開啟，這亦不會成問題的呢
，電源一下派沖 Fuse 過敏馬上燒掉，那就不太高
