找回密碼
 新用戶註冊
搜索
熱搜: hifi av 音樂
查看: 3770|回復: 8

[喇叭] Can I connect a subwoofer to C50?

[複製鏈接]
發表於 2013-1-10 11:59:42 | 顯示全部樓層 |閱讀模式
If so, how the connection should be done?
發表於 2013-1-10 12:42:47 | 顯示全部樓層
Since c50 is for 2ch, I would either use one of its output connected to the sub's low level in or better yet directly connect the sub's high level in to speaker terminal of the same power amp that drives the main speaker. but positioning as well as frequency point cutoff of the sub is critical in order to obtain a good integration of the sub to the main. However if your main speakers are conventional type and not the electrostatic, then the blending task should not be too hard to deal with. Hope this helps.

評分

1

查看全部評分

回復

使用道具 舉報

 樓主| 發表於 2013-1-10 15:15:52 | 顯示全部樓層
mlfan2012 發表於 2013-1-10 12:42
Since c50 is for 2ch, I would either use one of its output connected to the sub's low level in or be ...

Thanks C Hing,

I am using the XLR to connect the C50 to the 275.  So can I just use the RCA output to connect to a subwoofer and tune the subwoofer crossover?
回復

使用道具 舉報

發表於 2013-1-10 15:47:43 | 顯示全部樓層
Yes, you can use both XLR and RCA the same time to feed different poweramp or sub. just tune the volume and frequency point on the sub to match up with your main speaker. I have the c2300 pairing XLR with 2x601 and RCA to the sub.  
回復

使用道具 舉報

發表於 2013-1-11 00:37:02 | 顯示全部樓層
Dear 師兄,
這樣是可以的
1. 無源 Subwoofer 是可以先由 McIntosh C50 的 XLR or RCA pre-out 端子輸出, 接駁到電子分頻器上, 再經分頻控制後輸出至 power amp. 去推動喇叭

2. 有源 Subwoofer 就更簡單, 一樣以  XLR or RCA pre-out 端子輸出至 Subwoofer L , R input 即可, 當然亦要調較好適合匹配主聲喇叭之分頻度數與其他基本設定啦
回復

使用道具 舉報

 樓主| 發表於 2013-4-30 11:38:29 | 顯示全部樓層
kenho 發表於 2013-1-11 00:37
Dear 師兄,
這樣是可以的
1. 無源 Subwoofer 是可以先由 McIntosh C50 的 XLR or RCA pre-out 端 ...

Ken sir,

If I want to use just 1 XLR instead of stereo, how should I do the connection?
回復

使用道具 舉報

發表於 2013-4-30 12:26:49 | 顯示全部樓層
willip 發表於 2013-4-30 11:38
Ken sir,

If I want to use just 1 XLR instead of stereo, how should I do the connection?

Dear 師兄,
若以單一之 XLR 訊號 input 至  Subwoofer ,那即是說明 Subwoofer 之 XLR input is Mono in,因此駁在 C50 的 pre-out 上只能夠獲得單一的  L or R ch. 的訊號 ,當然不見意把左右的端子駁在一起,那是不會得到二合一的訉號    然而,也不是完全沒有辦法的,可以在 C50 和 Sub 之間加上一部 MEN220 ,因為 MEN220 除了本身是房間聲場處理器,還是一個電子分頻器,當中同時帶有 for Mono / stereo  Sub 之可控分頻輸出功能, RCA or XLR  input / output 也可以的。
回復

使用道具 舉報

 樓主| 發表於 2013-4-30 14:04:39 | 顯示全部樓層
kenho 發表於 2013-4-30 12:26
Dear 師兄,
若以單一之 XLR 訊號 input 至  Subwoofer ,那即是說明 Subwoofer 之 XLR input is Mono in ...

Can you PM me the final price of MEN 2200?
回復

使用道具 舉報

發表於 2013-4-30 16:35:53 | 顯示全部樓層
willip 發表於 2013-4-30 14:04
Can you PM me the final price of MEN 2200?

Dear 師兄,
已發消息給你了,謝謝支
回復

使用道具 舉報

您需要登錄後才可以回帖 登錄 | 新用戶註冊

本版積分規則

Archiver|小黑屋|聯絡我們|刊登廣告|Hiendy.com 影音俱樂部 一個屬於音響愛好者的家

GMT+8, 2024-3-28 21:22 , Processed in 0.041837 second(s), 19 queries .

Powered by Discuz! X3.5

© 2001-2023 Discuz! Team.

快速回復 返回頂部 返回列表