NEOTECH 喇叭線接駁一問

MichaelChoi@FB

小弟對喇叭接駁方法是新手, 有以下問題希望能解答一下.

我正在安裝汽車音響.  前置喇叭的高, 中, 低音會用獨音CHANNEL 去推.  喇叭線方面, 正常是應該買3對線吧.  而我想試試用NEOTECH 的UPOCC 單晶銅線. 但OCC 線只有很粗很粗的. (可能是給家用喇叭用所以一般是比較粗).   上網做了功課, 我的喇叭高音大約用16AWG, 中音用14AWG, 低音12AWG.  

見市面上有一款8芯線,  就想到用以下方法去做:  買2條 NES-3004 II 8芯線,  其中2芯作高音用, 2芯作中音用.   其餘的4芯每2芯又駁成1條(最後又變成2條線), 給低音用.  不知這種方法是否可行?  會否有干擾?   

網頁說這款線是11AWG, 其實是每一芯也有11AWG, 還是8條線加起來才有11AWG?




NES-3004 II is consisting of a number of individual conductors. NES-3004 II has 8 cores UP-OCC copper conductor (11AWG, 4.0sqmm) with CL3 flame retardant jacket insulation,

UP-OCC Tech. Multi-Size Copper & UP-OCC Silver Plated Copper Conductor
        8 Core Conductor Group
        CL3 Rated PVC Insulation
        Anti-Electrostatic PVC Outer Jacket

LowtherChina

Your proposed method is ok and of course, to avoid interference of the signals, using separate cables for low, mid and high are always the best.

11awg means each conductor is having 11awg guage but not the overall.

MichaelChoi@FB

LowtherChina 發表於 2016-10-31 14:52
Your proposed method is ok and of course, to avoid interference of the signals, using separate cable ...

請問知不知nes-3003 及nes3004的分別?   是否都有渡銀的?  如果我打算把它一開2, 推高音及中音喇叭, 應該用那款較好?

另外由於budget 有限, 假如最後只有高中音用單晶銅出, 而低音喇只改用無氧銅去出, d 聲會唔會好怪?

最後想問一下, 用ofc 及occ 線,  於汽車聽其實是否無乜分別?  

MichaelChoi@FB

另外其實有無人會用家用喇叭線裝去部車度呢?  會唔會浪費左?