|
樓主 |
發表於 2019-7-2 14:37:27
|
顯示全部樓層
本帖最後由 Howenintco 於 2019-7-2 15:37 編輯
新版DENAFRIPS TERMINATOR 已經推出,更新的是DSP數碼處理電路板,除了PCM/DSD數字上提升,還有有以下重點:
-電路上採用了四組優質線性穩壓器
-改良了的FPGA
-USB改用STM32F446 Advanced AMR Based MCU自家開發USB處理,Windows採用德國Thesycon USB Driver 對應。廠商日後可靈活透過firmware更新改進系統操作和穩定性
-雙AES/EBU純號輸入
-增加Sharp/Slow Filter
*** 即日售賣的Terminator 會全是新版 ***
現有Terminator用家不需擔心,你們的Terminator可以輕易 plug and play upgrade, DSP板現開始接受預訂。DENAFRIPS將會以超合理價提供給現有Terminator用家,費用是HK$1750. 升級只限香港區交收,所有不論來源Terminator客人可以享用這DSP升級。$1750. 謝謝!
各位有甚麼問題請隨時call or whatsapp @ 57106193 ( Dave ) 謝謝!
https://www.howenint.com/categories/denafrips
Technical Highlights:
• Improved Digital Signal Processing FPGA
• Four(4) sets of Linear Technology LDO Voltage Regulators
• DSD1024, PCM1536 Supports On USB & I²S Input
• Proprietary USB Audio Solution via STM32F446 Advanced AMR Based MCU
• Licensed Thesycon USB Driver For Windows Platform
• Driver-less On Mac & Linux
• Dual AES/EBU Input Supports
• To enable Dual AES/EBU, press "Input+" button while in Mute state
• Sharp/Slow Filters Option
• To select filters, press "Mode" button
• I²S Pinout Configuration
• To configure I²S Pinout, press "Phase" button while in Mute state
• I²S DSD Channel Swap Configuration
• To swap L/R channel for DSD playback, press "NOS" button while in Mute state. Note that this DSD channel swap will not affect PCM playback.
• Supported Formats
• DSD
• DSD64-DoP On All Input
• DSD1024 On USB & I²S Input
• PCM
• 24bits / 44.1, 48, 88.2, 96, 176.4, 192KHz On All Input
• 24bits /1536kHz On USB & I²S Input
• Sampling Mode: Non-Oversampling NOS / Oversampling OS
|
|