找回密碼
 新用戶註冊
搜索
熱搜: hifi av 音樂
查看: 18053|回復: 1

[擴音器] Luxman M200 power-amp

[複製鏈接]
發表於 2013-2-8 00:01:42 | 顯示全部樓層 |閱讀模式
Main characteristic
・ The power amp of 2 compact channel stereos of the size same as) such as 200 Lux man series (DA-200/P-200.
・ The 25W +25W output (8 Ω) that a combination is possible with high-performance bookshelf type speakers.
・ I adopt the discrete constitution with the high-performance part like the higher model (amplification circuit part).
・ The BTL mode which realizes the monaural amplifier constitution that is the high quality / high power that used M-200 two.
・ It is equipped with the large-capacity power transistor of the PC150W type to realize ability for high speaker drive by push-pull constitution.
・ The (high inertia) power supply which combined a large-capacity condenser (*2 5,200μF) with a power supply trans of the high regulation.
・ I adopt the Japanese inter-product made in Schottky barrier diode which a power supply rectifying circuit has few switching noises, and has high conversion efficiency to direct current.
・ It is equipped with the speaker relay of the low resistance level to support high driveability by parallel constitution of the LR independence.
・ I adopt the internal wiring of the round pattern wiring board of the Lux man tradition and the spiral lap shield, original custom parts abundantly.
・ Loopless chassis structure to shut out a rise of the ground impedance caused by the chassis electric current.
・ A balance input terminal corresponding to the balance signal transmission of high quality equipment (XLR type).
・ Unbalanced input terminal (RCA type) of the 18mm pace to support the high-quality sound cable which attached a large-sized plug.
・ Is easy to put on the very thick cable; the new development speaker terminal of the in-line (LR equivalence properties) layout corresponding to Y rag and the banana terminal.
・ A display (brightness adjustment, speaker impedance, hold time) which is many functions using 7 segment LED superior in visibility.
・ Other than direct input mode, the direct connection connection with the source apparatuses such as CD Players is equipped with possible barrier bulldog (volume adjustment possibility) input mode.
・ The balance input phase change switch deployment that is convenient at the time of the connection such as source apparatuses (a pre-amp and CD Player) made in foreign countries.
・ An AC inlet I can put on a desorption-type power supply cable, and to do.
・ It is attached in Lux man standard power supply cable JPA-10000 of the non-twist structure.

[specifications]
The consecutive effectiveness output (in a stereo)
/ gain 25W +25W (8 Ω), 35W+35W(4Ω)/23dB
At the time of consecutive effectiveness output (BTL( monaural recording))
/ gain 70W(8Ω)/29dB
Input sensitivity 1.0V/25W(8Ω)
Input impedance 16kΩ
0.002% of total harmonic distortion (1kHz/8Ω/25W), 0.04% (20Hz - 20kHz/8Ω/25W))
Frequency properties 20Hz - 20kHz (+0, -0.1dB), 10Hz - 100kHz (+0, -3.0dB))
S/N ratio (IHF-A) 109dB
Input imbalance (RCA)1 system, balance (XLR)1 system
1 output large size speaker terminal system
Attachment [front panel] power switch, the volume volume, power indication LED (three columns of *2)
Display mode reshuffling switch, input reshuffling indicator
[rear panel] an input terminal, a balance input phase reshuffling switch, an input reshuffling switch
Input level fixed / variableness reshuffling switch, BTL( mono)/ stereo reshuffling switch
Speaker terminal, signal ground terminal, AC inlet
Consumption electricity 105W (the electrical equipment security method), 50W (in no signal)
External form dimensions, weight 364(W) X 81(H) *295 (front knob 11mm, back terminal 27mm )(D)mm to include, 6.3 kg)
a01.jpg
a02.jpg
a03.jpg
發表於 2013-2-18 23:32:42 | 顯示全部樓層
其實用DAC直入可以嗎?
回復

使用道具 舉報

您需要登錄後才可以回帖 登錄 | 新用戶註冊

本版積分規則

Archiver|小黑屋|聯絡我們|刊登廣告|Hiendy.com 影音俱樂部 一個屬於音響愛好者的家

GMT+8, 2024-3-28 19:37 , Processed in 0.032437 second(s), 19 queries .

Powered by Discuz! X3.5

© 2001-2023 Discuz! Team.

快速回復 返回頂部 返回列表