找回密碼
 新用戶註冊
搜索
熱搜: hifi av 音樂
查看: 3049|回復: 0

[電源處理器] 美國 Shunyata Research Denali 6000 S V2

[複製鏈接]
發表於 2020-1-17 10:48:27 | 顯示全部樓層 |閱讀模式
王者風範 銳不可當
當Shunyata Research 蛇皇 一推出 Denali 6000便獲得全世界的讚譽,好評如潮,並獲得了多項年度產品獎。 2019 蛇皇推出Denali 6000S V2 改良版.  新款提住了全新的插座,具有更低的可測量噪聲以及大改進的DTCD(峰值電流)性能。 Denali 6000S V2現在具有獨立六個噪聲隔離區,可消除插座之間的互相干擾。聲音更定,更自然.

a3031931227e1aa16a20edf257566ad7.jpg

DTCD® DESIGNED (Dynamic Transient Current Delivery)
The Denali 6000/S was designed using the DTCD® analyzer. DTCD® Analysis is a technique that measures instantaneous current through low impedance electrical conductors and contacts. Shunyata Research uses it to optimize the design, specification and construction of parts and materials to ensure maximum current delivery performance.

CCI™ NOISE REDUCTION
Traditional power conditioners are designed to block incoming noise from outside the home but do not address the noise that is generated by the electronic components themselves. In fact, most conditioners reflect noise back into other components connected to the power conditioner. CCI™ (Component-to-Component Interference) is one of the most significant but often overlooked aspects to power system performance. The CCI™ filter consists of a proprietary multi-stage filter that reduces electrical noise and power supply generated interference.

QR/BB™ AND NIC™ NOISE REDUCTION
The NIC™ (Noise Isolation Chamber) is a patented technology that reduces high frequency power line noise. NICs™ use a non-reactive ferroelectric substance that actually absorbs high frequency noise. This allows Denali power distributors to reduce noise without any of the negatives associated with conventional power conditioner designs. Patented QR/BB™ technology dramatically reduces the sense of dynamic compression often heard when an amplifier is connected to a conventional power conditioner. Dynamics are actually improved when an amplifier is connected to the Denali even when compared to a direct connection to the wall outlet.  [ US Patents: 10,031,536 B2 and 8,658,892 ]

ZONES OF ISOLATION
The Denali 6000/S features six zones of isolation. US outlets are traditionally paired together into a duplex. The Denali 6000/S is configured in such a way that each outlet is individually isolated. This design allows for significant reduction of CCI™ regardless of system configuration.

GP-NR NOISE REDUCTION
When it comes to reducing noise, much focus is appropriately given to the electrical power lines that feed the audio system, but a significant amount of interference may also enter the system via the ground lines. These lines act as antennae, drawing in electrical noise that interfere with the operation of the connected components. Ground Plane Noise Reduction is a proprietary technology developed by Shunyata Research to significantly reduce  interference caused by this phenomenon, thereby providing a more pure audio experience.

HIGH CURRENT CAPABILITY
The Denali series power distributors have a 20 Amp continuous rating, ensuring unfettered power delivery to entire systems, including high-powered amplifiers. Advanced electromagnetic breakers combined with massive 8-gauge ArNi® wiring maximize dynamic contrast and bass impact.

HYDRAULIC ELECTROMAGNETIC BREAKER
Common power conditioners use fuses or thermal breakers for over-current protection. When heavily loaded, those devices cause voltage drops, increased contact impedance, thermal noise, excessive heat generation, and current-limiting effects. The Denali 6000/S uses a more advanced solution called a hydraulic electromagnetic breaker that can operate right up to the maximum current rating without the limitations of fuses or thermal breakers.

COPPERCONN® OUTLETS
All commercial grade connectors and virtually all audiophile grade connectors are made from a brass or bronze base metal. Some audiophile grade connectors may get a plating of nickel, silver, gold or rhodium which is only a few millionths of an inch thick. The Shunyata Research CopperCONN® is constructed using solid, high purity, oxygen-free copper as the base metal with a flash coating to protect the copper from oxidation. The CopperCONN® outlets and connectors are designed to provide superior grip strength and contact integrity. This contributes to a measurable improvement in DTCD® performance and a correspondingly obvious difference in audible performance.

CABLE CRADLE SUPPORT SYSTEM
Shunyata Research introduces a unique solution for the problem of heavy high-end power cables. The innovative Cable Cradle supports the weight of the power cable, preventing it from pulling away from the outlet. This system is designed to ensure reliable and secure electrical connections.

ARNI® CONDUCTORS

Shunyata Research has developed a proprietary line of ArNi® conductors. They are made with certified OFE C10100 (Certified ASTM F68) copper. The wire strands are arrayed in a proprietary “hollow tube” VTX™ geometry, which reduces skin effects. ArNi® conductors are then treated with Shunyata Research’s exclusive Kinetic Phase Inversion Process (KPIP™) for a period of 2 days.

VIBRATION MANAGEMENT
Mechanical vibration can be very destructive to system performance. The Denali was designed from its inception to include advanced forms of vibration control that improve the recovery of subtle musical detail and nuance. All chassis panels and internal structures are treated with vibration dampening panels. Each outlet is isolated from the chassis with a vibration-dampening gasket that reduces vibration conducted through the AC cables. All internal modules, filters, and electronics are encapsulated in a vibration-absorbent compound.

SSF-38 SHUNYATA FOOTER
The Denali 6000/S includes Shunyata Research’s SSF-38 isolation footers specifically designed to reduce vibration from the supporting platform. Power distributors react very similarly to amplifiers in relationship to floor borne vibration. After researching multiple forms of energy dissipation methods, Shunyata Research developed the SSF-38 to provide the performance characteristics of an expensive after market isolator but at a fraction of the cost.

KPIP™ “BLACKBIRD” PROCESSOR
Each Denali is treated with Shunyata Research’s proprietary Kinetic Phase Inversion Process (KPIP™). The KPIP™ dramatically reduces burn-in time and significantly improves sonic performance.

CRYOGENIC TREATMENT
Many of the electrical components in the Denali are treated in Shunyata Research’s own advanced computer-controlled cryogenics lab. Further cryogenic treatment of the unit is strongly discouraged, and will void your warranty.
您需要登錄後才可以回帖 登錄 | 新用戶註冊

本版積分規則

Archiver|小黑屋|聯絡我們|刊登廣告|Hiendy.com 影音俱樂部 一個屬於音響愛好者的家

GMT+8, 2024-3-29 01:59 , Processed in 0.029195 second(s), 18 queries .

Powered by Discuz! X3.5

© 2001-2023 Discuz! Team.

快速回復 返回頂部 返回列表