找回密碼
 新用戶註冊
搜索
熱搜: hifi av 音樂
樓主: atc_man

[喇叭] ATC 同好會

  [複製鏈接]
 樓主| 發表於 2010-11-7 01:16:13 | 顯示全部樓層
I am currently using the Bi-wire sound of heaven speaker cable with JMR jumper whick  sound great and it is important that it is not expensive. the high tone is very open . My tube amp is monoblock with 150W each side.
回復

使用道具 舉報

發表於 2010-11-8 18:22:48 | 顯示全部樓層
atc_man,

SFH is good choice, I also will try it later.

And, where to buy JMR Jumper? what's the sound?
回復

使用道具 舉報

 樓主| 發表於 2010-11-9 09:38:45 | 顯示全部樓層
I bought my JMR jumper from Simon with special White gold connector which can help release more high frequency to overcome the weakness of the ATC but it is not cheap. The JMR jumper is much more detail and airy then my another jumper VDH. The sound is much more neutral and relax not the same as VDH. The first time I use the jumper I feel the mid range is much more thinner than before but after warm up of the cable I feel the mid range is much more detail. May be I get used to the sound character so it is more subjective.
回復

使用道具 舉報

發表於 2010-11-9 21:03:03 | 顯示全部樓層
luxman amp 推 atc scm7新版.(先玩舊7,放左再玩新7)
回復

使用道具 舉報

 樓主| 發表於 2010-11-9 22:59:33 | 顯示全部樓層
hi faihim

how is the sound character of the tube pre  and solid power amp ?
回復

使用道具 舉報

發表於 2010-11-10 22:16:40 | 顯示全部樓層
我用 Mark  23.5推 ATC scm20
回復

使用道具 舉報

 樓主| 發表於 2010-11-11 13:00:43 | 顯示全部樓層
Hi acck nice setup !! any more to share
回復

使用道具 舉報

發表於 2010-11-14 17:44:00 | 顯示全部樓層
可分享的是將分音電容用 Solen代替,聲音,音場有大躍進
回復

使用道具 舉報

 樓主| 發表於 2010-11-18 08:55:14 | 顯示全部樓層
Is it easy to open the speaker to upgrade the 電容 ?
回復

使用道具 舉報

發表於 2010-11-18 18:14:40 | 顯示全部樓層
扭螺絲,抄數值
回復

使用道具 舉報

發表於 2011-2-26 23:12:07 | 顯示全部樓層
小弟都用緊atc scm 11, 請多多指教
回復

使用道具 舉報

發表於 2011-5-29 00:01:53 | 顯示全部樓層
Hi 各位ATC師兄小弟報到。ATC 50 active
回復

使用道具 舉報

發表於 2011-5-30 12:26:18 | 顯示全部樓層
只聽過ATC100
回復

使用道具 舉報

發表於 2011-7-11 09:46:38 | 顯示全部樓層
Is it easy to open the speaker to upgrade the 電容 ?
atc_man 發表於 2010-11-18 08:55


Atc_man ching, 我都好想知點樣upgrade電容.  請問有無多點資料呀 ?
回復

使用道具 舉報

發表於 2011-7-12 11:31:02 | 顯示全部樓層
Hi 各位ATC師兄,小弟用ATC SCM 19 報到。
回復

使用道具 舉報

發表於 2011-7-31 01:23:03 | 顯示全部樓層
我用ATC 50 ASL 同中置都係ATC

HiFi.jpg
回復

使用道具 舉報

發表於 2011-11-11 14:58:01 | 顯示全部樓層
I have been using avi S2000mi to drive ATC scm 10 for more than 10 years but I want to change amp.  Any suguestion, thanks.
回復

使用道具 舉報

發表於 2011-11-11 23:21:15 | 顯示全部樓層
bear6243 發表於 2011-7-31 01:23
我用ATC 50 ASL 同中置都係ATC

Bear6243 兄請問你現家用緊咩CDP 及前級架?
回復

使用道具 舉報

發表於 2011-11-12 10:32:24 | 顯示全部樓層
atc_man 發表於 2010-11-18 08:55
Is it easy to open the speaker to upgrade the 電容 ?

yes,

整份分音拿出來,數值照抄,用一些好些電容電阻線圈,舉例 Mundorf等,另做一份一模一樣的,原裝的一份保留收藏好,新做的一份造裝進聲箱。

ATC scm50/100 分音線路圖



回復

使用道具 舉報

發表於 2011-11-12 10:37:10 | 顯示全部樓層
本帖最後由 hksarac 於 2011-11-12 10:37 編輯

在加拿大網站買的Mills無電感電阻

Mills R001ab.jpg 電阻

回復

使用道具 舉報

您需要登錄後才可以回帖 登錄 | 新用戶註冊

本版積分規則

Archiver|小黑屋|聯絡我們|刊登廣告|Hiendy.com 影音俱樂部 一個屬於音響愛好者的家

GMT+8, 2024-3-28 21:33 , Processed in 0.037385 second(s), 15 queries .

Powered by Discuz! X3.5

© 2001-2023 Discuz! Team.

快速回復 返回頂部 返回列表