德國AMG turntable

racewong

vifone 發表於 2019-7-2 14:57
想问问：这个转盘有时不能转动，有时唱到一半就停住，有时把转盘部分抱起来一下再放下才能转动，出现这些问 ...

用了多久？

Avantgarde-HK

vifone 發表於 2019-7-2 14:57
想问问：这个转盘有时不能转动，有时唱到一半就停住，有时把转盘部分抱起来一下再放下才能转动，出现这些问 ...

你好,

很大可能是膠帶老化.  馬達在空轉, 爪不實條belt 所至

vifone

racewong 發表於 2019-7-2 15:56
用了多久？

约2年。。。。。。

vifone

Avantgarde-HK 發表於 2019-7-2 16:13
你好,

很大可能是膠帶老化.  馬達在空轉, 爪不實條belt 所至

拿开转盘看过，胶带没老化，出现这种问题的时候，马达不会转动。

Avantgarde-HK

vifone 發表於 2019-7-5 11:47
拿开转盘看过，胶带没老化，出现这种问题的时候，马达不会转动。

你好, 以你所敍述的情況而又不是皮帶問題的話, 應該是電源或控速板有問題.  請以PM聯絡做檢查及維修

vifone

Avantgarde-HK 發表於 2019-7-5 12:00
你好, 以你所敍述的情況而又不是皮帶問題的話, 應該是電源或控速板有問題.  請以PM聯絡做檢查及維修{:5_1 ...

请收pm。。。。。。

Avantgarde-HK

vifone 發表於 2019-7-6 21:51
请收pm。。。。。。

Pm sent

Avantgarde-HK

Black Beauty
AMG’s Viella 12 really is a hit in the round. And no, that’s not a prematurely delivered test result. It’s apparent even upon the most casual inspection of industrial design and form factor. Granted, following a record’s curves isn’t unusual for turntables. It would in fact seem inherent to the task at hand. Here it simply takes that farther than is often the case and does so with such a clever sense for proportion that even diehard design junkies might grant an exception. And yes, the plinth is oval, not round. But check out how perfectly it follows the platter’s diameter. Here one assumes that AMG’s curves also serve resonance minimization.

chowkel

美盤

Avantgarde-HK

chowkel 發表於 2019-7-25 22:06
美盤

Thanks!

Avantgarde-HK

AMG turntable at HKAV show 2019

Avantgarde-HK

Analog Manufaktur Germany introduces the Viella Forte turntable
the “super” version of our famous Viella. Machined in our Bavarian factory, the Forte incorporates the same platter bearing design, decoupled spindle, Lorenzi hand- built brushless DC motor, visual form and footprint of our highly regarded Viella. The AMG design team focused on mass, rigidity, and refinement to create the Forte, resulting in increased macro- dynamics, more inner detail, larger-scaled presentation, and greater effortlessness. Utilizing new materials and machining techniques, the Forte features a new plinth, platter, platter clamp, arm base, updated drive electronics, new power supply design and power supply housing.

Forte Plinth – CNC milled from solid aluminum billet, 70 mm thick and 23 kg weight (+280% larger than the standard Viella plinth at 25 mm thick and 8 kg). Platter bearing housing, motor housing, and feet directly machined from 70 mm aluminum billet provides higher rigidity and mass damping.

Forte Platter – CNC machined in house using aircraft-grade aluminum with decoupled spindle. Taller at 87 mm with a thicker inlaid PVC machined platter mat for a total weight of 14 kg (+120% larger than standard Viella platter at 72 mm and 11 kg).

Forte Clamp – New silhouette with larger shape, higher mass, and enhanced ergonomics. CNC machined in house using aircraft-grade aluminum and POM.

Forte Arm Base – CNC machined in house using aircraft-grade aluminum cylindrical stock, 35 mm bigger diameter and taller by 15 mm (+130% larger than standard Viella arm base).

Forte Drive Electronics – enhanced circuitry for faster start-up with larger Forte platter, mounted within mass-damped solid plinth.

Forte Power Supply – CNC milled from solid aluminum billet to echo the Viella shape. New toroidal transformer, additional voltage filtering for increased isolation from mains line fluctuations, and LED indicator for proper mains plug polarity.

Avantgarde-HK

https://parttimeaudiophile.com/2 ... able-high-end-2019/

Avantgarde-HK

AMG Viella Forte 除因為重新設計嘅低座重量增加了 280%令高低音得到順延外.  轉盤亦改良了令慣性更好, 提升了聲音準確度.  




另外, 新款外置電源提供更佳穩定性及隔離

hksarac

AMG唱盤要買張AMG凳來聽

Avantgarde-HK

hksarac 發表於 2019-10-25 18:06
AMG唱盤要買張AMG凳來聽

Tomt

AMG,不如加埋M power 可以賣貴D

Avantgarde-HK

Tomt 發表於 2019-10-28 09:50
AMG,不如加埋M power 可以賣貴D

Avantgarde-HK

2019慕尼黑展/AMG發表新旗艦Viella Forte唱盤
德國AMG專門做黑膠唱盤，2019年推出的新產品是Viella Forte 12 Turbo高階唱盤，還分為兩款，素面頂板的Viella Forte要價30,000美金，頂板加上雷射雕刻花紋的Engraved版本要價32,000美金。在展覽現場Garth Leerer告訴我，Viella Forte大幅提升了實心鋁合金CNC的比例，在底座的部分，之前的Viella也是實心鋁合金CNC車製，但是底下是木頭飾板，現在Viella Forte 12整塊都是鋁合金，厚度達70mm，重量23公斤，比之前標準版的Viella增加25mm，重量增加8公斤，大幅提高唱盤質量，而唱盤質量越高就更穩固，轉盤的部分也是如此，更為厚重，重量增加了14公斤。

Avantgarde-HK

Forte incorporates the same platter bearing design, decoupled spindle, Lorenzi hand- built brush less DC motor, visual form and footprint of our highly regarded Viella.

The AMG design team focused on mass, rigidity, and refinement to create the Forte, resulting in increased macro- dynamics, more inner detail, larger-scaled presentation, and greater effortlessness. Utilizing new materials and machining techniques, the Forte features a new plinth, platter, platter clamp, arm base, updated drive electronics, new power supply design and power supply housing.