|
|
(分享)最近為網友完成的特別版SONATAS-I Integrated Stereo Valve Tube Amplifier
http://www.ys-audio.com/scor.htm
special version SONATAS-I Integrated Stereo Valve Tube Amplifier
The power transformer is Hasimoto transformer , made in Japan.
The output transformer is Hasimoto HW-60-5 CUT CORE orient high B output transformer , made in Japan
Russian 6C51H-B Nuvistor triode tube working at Class-A for Line stage
Gold Lion KT88
coupling cap use Sonicap
Specifications
Output and T.H.D :
1W per channel , 1kHz total harmonic distortion typically 0.4%
3W per channel , 1kHz total harmonic distortion typically 0.6% (0.6% at 30Hz , 0.8% at 20kHz)
60W per channel , 1kHz total harmonic distortion typically 1.5%(1.5% at 30Hz , 2.9% at 20kHz)
Controls : Volume, Gain , Input Selector , Power On/Of
Input : RCA x 4 pair
Input Impedance : 100K ohm
Frequency Response :
3W 20Hz ~ 59KHz ( 20Hz -1.5dB, 59KHZ -3dB)
60W 20Hz ~ 59kHz (20Hz -1.5dB , 59kHz -3dB)
Input Sensitivity :
0.2V / 60W ( volume at Max , gain at high)
0.4V / 60W ( volume at Max , gain at low)
Output impedance : 4 ohm / 8 ohm
Noise: Less than 0.7mV
Damping factor : approximately over 20
Phase Mode : Normal
Tubes Required:
Line stage preamplifier: 6C51H-B Nuvistor triode x4
Power amplifier: KT88 Power Output x4 , 12AU7 Driver x2, 12AT7 Input x2.
Dimension: 445mm x 400mm x 180mm (W x D x H) each
Total Weight: 20kg
Power Source: 220-240V,50/60Hz

|
評分
-
1
查看全部評分
-
|