|
|
發表於 2010-9-22 00:51:03
|
顯示全部樓層
ProAc D1 spec : - (New model)
Nominal Impedance
8 ohms
Recommended Amplifiers
20 to 100 watts
Frequency Response
38Hz to 30kHz
Sensitivity
87.5 db linear for 1 watt at 1 metre
Cabinet
Heavy, inert construction damped with special material and featuring slim, rigid front baffle design to aid dispersion.
Bass/Midrange Driver
New 5" (130mm) ProAc unit featuring glass fibre weave cone, raised spider assembly, EXCEL magnet system and unique acrylic damping phase plug.
Tweeter
ProAc ¾ dome unit with honeycomb wound voice coil, special damping and ferrofluid-cooled coil assembly.
Crossover
Finest components on dedicated circuit board with multistrand oxygen-free copper cable throughout. Split for optional bi-wiring/bi-amping.
Dimensions
12" (305mm) high
6 5/8" (168mm) wide
10 1/4" (260mm) deep including grille thickness of 12mm
Weight
20lbs (9 Kgs)
Mode
Stand mounted
Grille
Acoustically transparent crimplene
Finish
Finish Available in the following real wood veneers: Black Ash, Mahogany, Cherry, and Maple. Ebony to order at extra cost.
ProAc 1SC spec (Old model)
Nominal Impedance
8 ohms
Recommended Amplifiers
20 to 100 watts
Frequency Response
38hz to 30Khz
Sensitivity
86db linear for 1 watt at 1 metre
Bass/Midrange
New five inch unit with special transparent cone. Copper magnet assembly and
phase plug mounted on die-cast chassis. High temperature voice coil.
Tweeter
ProAc three quarter inch dome unit, with honeycomb - wound voice coil.
Special damping and ferrofluid-cooled coil assembly.
Crossover
Finest components on dedicated circuit board. Multistrand oxygen-free copper cable throughout. Split for optional bi-wiring and bi-amping.
Dimensions
12" (305mm) high
7" (178mm) wide
9 1/4" (235mm) deep
Weight
18lbs (8kg)/cabinet
Mode
Stand mounted
Grille
Acoustically transparent crimplene
Finish
Available in the following real wood veneers: Black Ash, Maple, Cherry, Mahogany, Ebony, Bird’s Eye Maple |
|
IP卡
狗仔卡
提升卡
置頂卡
沉默卡
喧囂卡
變色卡
顯身卡
發表於 2010-9-22 02:05:21
發表於 2010-9-22 09:15:50
