|
|
Paradigm SUB2 六隻八寸單元的重低音
http://www.paradigm.com/products ... nature-series/sub-2
SPECIFICATIONS
Design Hexagonal cabinet with multiple high-excursion
drivers radially aligned in a Vibration-Canceling
Design Architecture, patented built-in
Ultra-Class-D™ power amplifier with Power
Factor Correction, sealed enclosure,
PBK interface
NOTE: Due to the incredibly high power and
tremendous output the SUB 2’s grilles
are non-removable
Amplifier**: High-Current,
Discrete Output 9,000 watts Dynamic Peak /
4,500 watts RMS
Amplifier Features Auto-On / Off, Trigger On / Off, soft clipping,
electrical shorting protection, thermal protection
Bass Driver Six 254-mm (10 in) RCR™ mineral-filled
co-polymer polypropylene cones,
FEA-optimized overmolded thermoplastic
foam-surrounds, 76-mm (3 in) ten-layer
long-excursion voice coils,
high-temperature composite Nomex®
formers, dual advanced spiders, 25.2-lb
(10.5 kg) hard ferrite magnet / motor
structure, massive center heatsink
and oversize pole piece, AVS™
die-cast heatsink chassis
Low-Frequency Extension* 7 Hz (DIN)
Subwoofer Cut-Off Frequency Variable 35 Hz - 150 Hz; Bypass Option
Sub / Sat Phase Alignment Variable 0° - 180°
Line-Level Input RCA (S/E) Left and Right or Sub-Out / LFE or
Balanced XLR. From Sub-Out / LFE-Out of
preamp, processor or other line-level source
Line-Level Input Sensitivity 100 mV mono
Line-Level Input Impedance RCA: 10k ohms; XLR: 20k ohms
AC Voltage 120v (at 3,000 watts) - 50 / 60 Hz
240v (at 4,500 watts) - 50 / 60 Hz
(see note on Universal Input Power below)
Accessory Included Paradigm Perfect Bass Kit
Height, Width, Depth††
62.2 cm x 60.4 cm x 57.8 cm
24-1/2 in x 23-3/4 in x 22-6/16 in
Diameter of Hexagonal Cabinet 60.4 cm
23-3/4 in
Weight (unpacked) 106.0 kg / 230 lb each
Finishes Cherry, Piano Black, Black Ash
* DIN 45 500. Indicates -3 dB in a typical listening room.
** Connected to a 240-volt outlet.
†† Dimensions include grilles and feet.
Universal Input Power
SUB 2’s Universal Input Power feature allows the subwoofer to operate connected to any line voltage between 108 volts and 265 volts. In order to achieve maximum output, connect to a 240-volt line. (See Dealer for additional information.)
|
|