Daphile - Digital Music Convenience for Audiophiles

sophiawilson

Thanks!  Will try to see if this works!

sophiawilson

It does not work for Win10.  I think the instruction only works for Win7 as EasyBCD said most features are grayed out when it detects I boot in EFI mode.

ton_ton_ton

WIN10 WORKS
小弟而家都係WIN10 DAPHILE DAUL BOOT的
不過我個WIN10係WIN7 UPGRADE上去的, 唔知係咪同呢樣有關

https://neosmart.net/wiki/easybcd/uefi/
DISABLE UEFI BOOT MODE得唔得的?

Option 1: Disable UEFI and Secure Boot

Most PCs and laptops currently shipping with and using the UEFI firmware and bootloader can be configured to disable UEFI entirely and instead revert to “legacy” MBR boot mode. Two separate steps are often required to fully achieve this; we have documented both with visual guides and sample images taken from the more-common UEFI configuration pages:
1.Enabling legacy boot mode on UEFI PCs
2.Disabling Secure Boot

These steps do not turn off UEFI (which isn’t possible, since that’s what your motherboard is running), but they do enable you to boot into Windows the traditional way (via the MBR). However, your Windows installation is already in UEFI/GPT mode, and UEFI installations of Windows cannot be booted via the legacy MBR approach! You will need to either format (making sure to completely reinitialize the disk to get rid of the GPT) and reinstall Windows, or else use a utility like Easy Recovery Essentials which can convert your existing installation to be bootable in both UEFI/GPT and BIOS/MBR mode in-place, without losing any data. Performing a single “Automated Repair” run in EasyRE is sufficient to make your Windows installation bootable in legacy/MBR mode as well as EFI/GPT mode. You may need to give legacy/bios mode loading priority over UEFI in your BIOS setup/configuration (“load legacy first”).

sophiawilson

I see.  UEFI is used for WIN 8 and 10.  If you upgrade from WIN 7 you may not use UEFI.  Or if you first get the dual boot to work then upgrade to WIN 10 it should also work.  I did read all the options but option 1 doesn't work for me as my PC comes with WIN 10.  I disable UEFI and secure boot but it still boots up using UEFI.
Unless I reinstall WIN 10 again I doubt it will work.  I will keep using the USB key to boot up daphile.  Thanks!

maiku1963

新手請問，為何每次用完dahile後，底板時間會不同？每次都要自已改時間！

kin1111kin

我也出現同樣問題，另外也不能修改設定，請問如何解決

karmayim

最近 MOOV 玩到 Chromecast，首先就要安裝 MOOV 的最新版本 Android 或 iOS App，另外要一部具備 Chromecast built-in 的器材, 有無師兄在 Daphile 裝過 Chromecast Plugin? 我吾成功, 只顯示:

        Configuration file missing - create one by clicking "generate" or, if autosave is on, refresh this page

按過 "generate", 但顯示的問題不變, 有無師兄可指教一下?